When you want to give your cherry wood coffee table or drawer that superb finish, you might end up confused and irritable. This is because there are too many paint and finish options to pick from, all of which seem to give the best results. The finish you apply on a wooden surface should bring out the wood’s beauty and accentuate the room’s overall mood. To some extent, the finish you pick should complement your personality.
In our article today, we take a journey through the wood-furnish street, where we explore the qualities of Rubio Monocoat. Many people love wood floors, doors, furniture, moldings, musical instruments, or boat interiors made of cherry wood. They want the best furnish that will impeccably bring out the straight grains of this deciduous hardwood. Rubio Monocoat is one of the best paints to go for if you want to apply a Monocoat on your cherry wood.
In our article, we explore how perfectly the Rubio Monocoat can match the cherry wood. We explore how perfectly this wood finish can match cherry wood. To get the best results, you will need to understand what Rubio Monocoat is and cherry wood. You will also appreciate how perfectly they are suited to each other and the advantages of going this route. We will also take a look at the bad effects the finish, if any, the finish might have on the cherry wood.
Understanding cherry wood
Cherry wood is a hardwood that exhibits straight grains whose heartwood hue can range from reddish brown to rich red. The sapwood, on the other hand, is creamy even though it can be reduced by steaming. The American cherry wood is found in most northern states and Canada. The tree takes a shorter time than most hardwoods to mature. You can get lumber or veneer from this wood. This makes it ideal for making a wide range of furniture and parts.
Cherry wood is easy to machine and plane and more workable than popular wood such as maple or oak. Its carving and folding capabilities are superior, making it a favorite for carpenters. Moreover, the wood is easily sanded, polished, and stained. It normally exudes a very smooth and fine finish.
It is also worth noting that the heartwood of cherry wood is resistant to decay. However, you might have difficulty applying a preservative as the wood resists preservatives. Another feature you should consider is that the wood’s heartwood darkens rather quickly upon exposure to light.
What is Rubio Monocoat?
Rubio Monocoat is a popular hard-wax oil finish. You will find that rather than giving your cherry wood a polyurethane protective layer, it actually infuses the wood. This gives the lumber a much richer and warmer look. This further allows the natural allure of cherry wood to radiate for years. The one thing that makes this finish stand out is its ability to do the job in just a single coat. Unlike other finishes, which require up to four coats, the Rubio Monocoat single application is easy, even for a beginner.
Rubio Monocoat is preferred by environmentally conscious people because it doesn’t contain VOC or fumes. The finish is availed in over 40 different colors making it practically impossible to leave the paint shop empty-handed. The good thing about Rubio Monocoat is that it is mixable, allowing you to recreate a broader range of hues.
Does Rubio Monocoat go well on cherry wood?
The Rubio Monocoat finish goes very well with cherry wood. As stated earlier, cherry wood, especially heartwood, has a very distinct reddish pattern. Given that most people opt to retain the long antique grain of the cherry lumber, they opt for the Rubio Monocoat. The grains are further enhanced by the fact that Rubio finish is a Monocoat. You won’t cover the beautiful long grains with subsequent layers of finish.
Rubio Monocoat has been designed using the latest technology, making it possible only to apply a single coat. Because the Rubio Monocoat permeates superbly in cherry wood, your floor or furniture will stay longer with the coat. This differs from the ordinary paints of finishes, which form a layer over the surface, making it susceptible to peeling.
Factors to consider before applying Rubio Monocoat on cherry wood
As with every other paint or finish, you should consider a few factors before applying Rubio Monocoat on cherry wood. These considerations are made to ensure the two are compatible and to achieve the desired results. Here are the factors to consider:
1) Sanding the surface of the cherry wood
The cherry wood you want to give a fine finish with Rubio Monocoat should be thoroughly sanded first. You should start with the roughest grit and increase this to the finest grit. Normally, it is recommended that you start with 80 grit, 100 grit, 120, 150, 180, and then 220 grit. You should not skip any of the grit.
In order to get the best molecular adhesion of the Rubio Monocoat, it is recommended that you apply the finish anywhere between 120 grit and 220 grit. Higher grits than the recommended increasingly open lesser pore substrates, making the Monocoat-wood bond less effective.
2) Removing dirt and debris from the surface
Use a dry rag to wipe out all dust from the surface you intend to apply Rubio Monocoat. After sanding the surface, a lot of wood dust accumulates on the surface, and if you apply the finish without wiping it first, terrible results are bound to happen. After wiping most of the dirt using a dry rag, use mineral spirit or denatured alcohol on a rag to wipe the surface. There is Rubio raw wood cleaner for this job. Leave the surface to dry for an hour.
3) Exposure to foot traffic and stains
As highlighted earlier, cherry wood is perfect for flooring. The foot traffic on a floor, be it the stairway or corridor, Rubio Monocoat application should be up to standard. When lumber is used for flooring, you must consider the amount of foot traffic, stains, pets playing around, and even the dragging of furniture.
Rubio Monocoat infuses into the cherry wood upon application of the single coat. Even on a floor that gets a lot of foot traffic, the Monocoat remains intact. According to many people that have applied this Monocoat, you can rest easy knowing even bad weather will not destroy the floor or the furniture once you have used this Monocoat.
4) The mixing of the Monocoat must be right
The grandeur of cherry wood is best displayed when the paintwork is done right. When working with the Rubio Monocoat, ensure that you have mixed the finish properly according to the instructions from the manufacturer. Rubio Monocoat is mixed in a 3:1 ratio between the actual oil and the accelerator parts. The accelerator helps reduce resting time from 30 days to just 7 days.
Benefits of using Rubio Monocoat on cherry wood
If you are working on cherry wood, you must want the true texture of the wood to come out without any or little alterations. The Rubio Monocoat offers you this and so much more. Let us look into the other benefits you stand to enjoy once you opt for this finish;
- You have many options to choose from; over 40 Rubio Monocoat colors
- The original cherry wood look and feel are enhanced. The wood won’t yellow over time
- It can withstand high foot traffic and bad weather
- It requires minimal maintenance
- It dries up fast and 5 days after painting you can wash the surface with soap and water
- Minimal usage you can use as little as a liter for a 30m2 surface
- The Rubio Monocoat extends the life of cherry wood because it prevents water, age, and wear damage
- There are 0% of VOC
- Natural linseed oil has been used in making the Monocoat
Are there any side effects of using Rubio Monocoat on cherry wood?
We try to look for a reason why one should not apply Rubio Monocoat on cherry wood, and it’s almost impossible to come up with any. The only thing that stands out in the application of the Monocoat is that some expertise is required. You must thoroughly sand the cherry wood surface before you can apply the finish. Moreover, avoid skipping any of the grits while sanding. This is to avoid pigtail or swirl marks on the wood surface. It is also worth noting that cherry wood slightly resists Rubio Monocoat during application.
The one thing that stands out, which we can’t smile about, is the cost of Rubio Monocoat. It is significantly more expensive than epoxy and other types of finishes. The price tag on a 350ml can is $62. If you want to be specific on the Monocoat you prefer, the price goes up considerably.
Applying the Rubio Monocoat on cherry wood can rarely go wrong. The cherry wood gives your dining table a homely natural look and feel. If you pick cherry wood for office furniture, you will enjoy the natural ambiance the wood brings into the room. Applying the Rubio Monocoat further enhances the amazing traits of this north American hardwood.
- Plus 3 Joint Compound: Dry Time, Quality, And Some Concerns - May 29, 2023
- How to Fix Wall Anchor Holes That Are Too Big? Best Methods - May 28, 2023
- Johnson’s Paste Wax Ingredients – Why Is It Good for Wood? - May 27, 2023